Home Up

 

PiLas Specifications

bullet

All given wavelengths are examples. If you do not find your requested wavelength do not hesitate to contact us. As an option we will try to select diodes with the requested wavelength (PILxxx SWS).

bullet

As an option we can select diodes with shorter pulses or higher peak power (PILxxxSPS). Please ask our specialists.

bullet

A complete PiLas system consists of controller (EIG), the optical head and the optics.

bullet

The optical heads are interchangeable to get different wavelengths with one EIG. However, the heads can not be exchanged between drivers with 1 MHz or 100 MHz repetition rate.

bullet

In case of questions, we can simulate the beam propagation and recommend the most suitable combination of optics.

bullet

If you inform us about your application, we will find out the best solution.

     

Optical Head with laser diode (up to 1 MHz)

 
bulletTypical parameters – please ask for special requests
bulletThere are some additional wavelengths available. Because of the different reso­nant structures of DFB / DBR – lasers the optical jitter can be much larger than the typical 3 ps in Fabry-Perot lasers. Please contact us before ordering.
PILxxx

wavelength
(nm)

tolerance
(nm)
spectral width
(nm)
pulse width
(ps)
peak power in collimated beam (mW)(1)
PIL037 375 ± 10 < 7 < 60 > 140
PIL040 408 ± 10 < 7 < 45 > 400
PIL043 440 ± 10 < 7 < 60 > 140
PIL047 NEW! 473 ± 10 < 7 < 60 > 140
PIL063 635 ± 10 < 7 < 40 > 150
PIL067 670 ± 10 < 7 < 40 > 300
PIL078 780 ± 15 < 7 < 35 > 300
PIL083 830 ± 15

< 10

< 35 > 400
PIL085 850 ± 15 < 10 < 25 > 100
PIL090 905 ± 15 < 10 < 50 > 400
PIL106 1060 +5/-15 < 12 < 40 > 400
PIL130 1300 +5/-15 < 13 < 35 > 100

PIL155

1550

± 15

< 15

< 25

> 50

PILxxxDFB 850, 1310, 1550 ± 3 < 0.1 30 - 100 > 20
(1) Higher output on request
 
ALS GmbH reserves the right to change specifications without prior notice.

Optical Head of the Fast PiLas
(fixed repetition rate 100 MHz)

 
Other repetition rates between 20 … 100 MHz on request
 
PILxxxF wavelength
nm
tolerance
nm
spectral width
nm
pulse width
ps
peak power
mW (5)

avg. Power
mW (6)

PIL040F(4) 

400

± 10

< 7

< 50

> 100

> 0.25

PIL063F

635

± 10

< 7

< 45

> 100

> 0.5

PIL067F

670

± 10

< 7

< 45

> 100

> 0.5

PIL078F

780

± 15

< 7

< 45

> 100

> 0.5

PIL083F 

830

± 15

< 10

< 45

> 100

> 0.4

PIL130F 1300 + 5/-15

< 13

< 50 > 50

> 0.2

PIL155F 1550 + 5/-15

< 15

< 30 > 50 > 0.1
PILxxxDFBF 850, 1310, 1550 ± 3 < 0.1 30…100 > 20 > 0.05
(4) - only with TEC and fixed repetition rate to 50 MHz
    -
PIL037F and PIL043F on request. PIL047F  probably in 2004
(5)  typical output power for collimated beam. Higher output power on request
(6)  for higher average power a thermoelectric stabilization is recommended

ALS GmbH reserves the right to change specifications without prior notice.

Dimensions of the optical heads: width x height x depth = 74mm x 38mm x 107mm 

Click PiLas Control Units EIG1000D and EIG1000AF for driver information 

 

Telephone: 781-255-1064 / Fax: 781-255-1065 / email: info@bluehilloptical.com

Home ] Up ]

Send mail to webmaster@bluehilloptical.com with questions or comments about this web site.
Click here to access Blue Hill's Terms and Conditions of Sale.  Copyright © 2005 Blue Hill Optical Technologies LLC, All Rights Reserved  Last modified: 11/19/05 - Our Privacy Policy is here